The COM6 is a public address amplifier with a power up to 60 Watt. It contains 2 unbalanced stereo line level inputs, which are switchable between Line and Microphone level and one Microphone level Input. This way, a maximum of 3 balanced microphones can be connected. The output level is selectable between high impedance 100V, 70V and 25V outputs, or 4 Ohm low impedance. It is equipped with an advanced protection circuit, which protects against DC short circuit, overheating, overload and limits the signal when necessary. All control functions such as individual channel volume controls, a 2 band tone control, the master volume control and indicators like a VU LED bar and clipping LED’s are located at the front of the amplifier.19” adapters are separately available (COM6MB).
| RMS/AES power handling | 60 W | ||
| Inputs | Balanced Microphone 1 | Impedance | 20 kΩ balanced |
| Sensitivity | -50 dB ~ -6 dB | ||
| Connector | 6.3 mm Jack | ||
| Balanced Microphone 2 - 3 | Impedance | 20 kΩ balanced | |
| Sensitivity | -50 dB ~ -6 dB | ||
| Connector | Stereo RCA & 6.3 mm Jack | ||
| Aux 2 - 3 | Impedance | 10 kΩ Unbalanced | |
| Sensitivity | -30 dB ~ +14 dB | ||
| Connector | Stereo RCA & 6.3 mm Jack | ||
| Tele-Paging | Sensitivity | 0 dB - 600 Ω balanced | |
| Connector | 3-pin Euro Terminal Block (Pitch - 3.81 mm) | ||
| Outputs | Connector | 4-pin Euro Terminal Block (Pitch - 5.08 mm) | |
| Frequency | Response (± 3 dB) | 50 Hz - 15 kHz | |
| THD+N (@ 1 kHz) | < 1% | ||
| Signal / Noise | > 100 dB | ||
| Power | Supply | 230 V AC / 50 - 60 Hz | |
| Outputs | Level | 100 V - 166 Ω | |
| 70 V - 83 Ω | |||
| 25 V - 10 Ω | |||
| 15.5 V - 4 Ω | |||
| Protection | DC Short circuit | ||
| Over heating | |||
| Over load | |||
| Signal limiting | |||
| Dimensions | 10.63 x 2.99 x 9.055 " (W x H x D) | |
| Weight | 11.57 lb | |
| Colours | Black | |
| Accessories | Optional | COM6MB2 Mounting bracket |
